 Tel: 0086-371-64360588 Fax: 0086-371-64398985 Cell: 0086-15639269289 Whatsapp:0086-185 3819 7529 Viber:0086-185 3819 7529 Sales: Manager: Mr. Zhang Skype: ztbrickmachine Email: sales@ztbrickmachine.com |
Brick Making Machine JZK50
Description:
Adopting domestic and international technology, Zhengtai Ltd manufactured a good-performance brick machine, Vacuum Extruder JZK50. This machine uses crushed materials like pure gangue, pure shale, coal ash,
clay, construction waste, low grade clay and perlite to produce various bricks such as common bricks,
solid bricks and hollow bricks of different types. Applicable materials are widespread, shale, gangue, fly ash,
and industrial tailings, all can be used as raw materials. Because of the different raw materials,
the vacuum extruder is also called coal gangue brick machine, shale brick machine, fly ash brick machine,
clay brick machine and so on.
The machines produced by Zhengtai has found a ready market at home and abroad, which has developed
into complete equipments including two-stage vacuum-extruder, auto strip cutter, auto adobe cutter,
auto setting machine, drum-type adobe cutter, vertical strip/adobe cutter, double shaft mixer, two-stage crusher without screen grate,
box feeder, hydraulic pusher, adobe separator, horizontal dosing machine, energy-saving electric excavator,
auto green brircks delivery trolley and electric kiln car, etc.
Structure and Features:
1. The two-stage vacuum extruder consists of mixing part and pressing/forming part,
which is equipped with air compression system and pumped vacuum system. The pneumatic clutch adopts
remote control and the installation of the mixing tank and forming tank is flexible enough for users.
2. It has the following features: rational construction, strong adaptability, large extrusion pressure,
low energy consumption, high output, easy maintenance, etc.
3. The reamer of this machine is made of wear-resistance materials
which can extend its service life by 4~7 times. And the screw lead is scientifically designed, increasing the extrusion
pressure and improving the work efficiency. The machine uses floating axle shaft to avoid sway and instability
after a long time operation, an energy saving of 15~30%.
4. The shafts used inside the machine are special ones which are harden by quenching. Hard tooth
gear surface is adopted in the reducer.
5. There are safety devices in the splash transmission and material level control, which can protect main
machine parts and lengthen the machine service life.
6. There is a pressure meter on the head of the vacuum extruder, with which the press data can be read.
The raw materials are disposed by humidification and curing so that users can get a big extrusion pressure
and high output.
Technical Parameters:
clay, construction waste, low grade clay and perlite to produce various bricks such as common bricks,
solid bricks and hollow bricks of different types. Applicable materials are widespread, shale, gangue, fly ash,
and industrial tailings, all can be used as raw materials. Because of the different raw materials,
the vacuum extruder is also called coal gangue brick machine, shale brick machine, fly ash brick machine,
clay brick machine and so on.
The machines produced by Zhengtai has found a ready market at home and abroad, which has developed
into complete equipments including two-stage vacuum-extruder, auto strip cutter, auto adobe cutter,
auto setting machine, drum-type adobe cutter, vertical strip/adobe cutter, double shaft mixer, two-stage crusher without screen grate,
box feeder, hydraulic pusher, adobe separator, horizontal dosing machine, energy-saving electric excavator,
auto green brircks delivery trolley and electric kiln car, etc.
Structure and Features:
1. The two-stage vacuum extruder consists of mixing part and pressing/forming part,
which is equipped with air compression system and pumped vacuum system. The pneumatic clutch adopts
remote control and the installation of the mixing tank and forming tank is flexible enough for users.
2. It has the following features: rational construction, strong adaptability, large extrusion pressure,
low energy consumption, high output, easy maintenance, etc.
3. The reamer of this machine is made of wear-resistance materials
which can extend its service life by 4~7 times. And the screw lead is scientifically designed, increasing the extrusion
pressure and improving the work efficiency. The machine uses floating axle shaft to avoid sway and instability
after a long time operation, an energy saving of 15~30%.
4. The shafts used inside the machine are special ones which are harden by quenching. Hard tooth
gear surface is adopted in the reducer.
5. There are safety devices in the splash transmission and material level control, which can protect main
machine parts and lengthen the machine service life.
6. There is a pressure meter on the head of the vacuum extruder, with which the press data can be read.
The raw materials are disposed by humidification and curing so that users can get a big extrusion pressure
and high output.
Technical Parameters:
|
Model
|
JZK 50
|
|---|---|
|
Capacity
|
13000-18000 pieces/hour
(standard brick) |
|
Reamer Diameter
|
500mm
|
|
Maximum Extrusion pressure
|
3.5 Mpa
|
|
Vacuum Degree
|
≤92%
|
|
Power
|
Mixing Part:55KW
Pressing Part: 132KW |
|
Dimension (L*W*H)
|
5350*1800*2100mm
|
